One factory, one focus: PCE. From TPEG, HPEG and EPEG monomers to liquid mother liquor and powder superplasticizers — we supply concrete and mortar producers in 60+ countries with factory-direct pricing and batch-consistent quality.
We don't resell, we synthesize. Every product below is made in our own facility, so you get consistent molecular structure batch after batch and a price with no middleman markup.
Spray-dried polycarboxylate powder for dry-mix mortar, UHPC, self-leveling and grout. Water reduction up to 40% with excellent redispersibility.
40% / 50% / 60% solid content polycarboxylate mother liquor for admixture producers. Dilute to your specification or use as-is, with stable viscosity and no phase separation.
High-conversion polyether macromonomers for your own PCE synthesis. Consistent hydroxyl value and low residual PEG, so your polymerization behaves predictably.
Slump retention agents, anti-bleeding agents and stabilizers for blending into your own admixture formulations or applying directly at the batching plant.
Anionic polymer dispersants and wetting agents for coatings, pigments and mineral fillers — including low-foam grades for limestone hydration systems.
Additive packages for tile adhesive, self-leveling compounds and repair mortar — improving adhesion, flexibility, open time and sag resistance.
Different cement, different aggregate, different curing — the same PCE behaves differently. Tell us your application and our R&D team will match or custom-develop the right grade.
Slump retention that holds from the batching plant to the point of discharge, matched to your local cement and supplementary materials.
Learn moreFast strength development for steam curing and quick demoulding cycles, with surface finish quality that meets architectural standards.
Learn moreAchieve 150 MPa and above with an ultra-low water-cement ratio, using PCE grades engineered for high binder content and silica fume systems.
Learn morePowder PCE with excellent redispersibility for tile adhesive, repair mortar and render — improving bond strength, open time and workability.
Learn moreHigh-flow PCE grades with low bleeding for self-leveling compounds, non-shrink grout and precision grouting applications.
Learn morePCE dispersants for low-cement refractory castables — better flow and placement without sacrificing hot strength.
Learn moreSix reasons our customers give when we ask why they stayed.
We own our synthesis lines and control every step from monomer to finished PCE. You are talking to the factory, not an intermediary adding a margin.
Every batch is tested for solid content, pH, density, molecular weight and water reduction before it leaves the plant. A COA ships with every order.
1 kg liquid or 500 g powder sample, shipped within 3 working days. Test it with your own cement and aggregate, then decide.
Send us your local cement and sand. Our R&D team develops a PCE formulation matched to your exact materials and climate conditions.
Support by email, WhatsApp or video call, at no extra cost. For bulk customers we can send an engineer on site for trial production.
7–15 working days for a full container after deposit. We quote the realistic date rather than an optimistic one that slips.
Our production base runs automated polymerization reactors, an in-house R&D laboratory and a full quality-control workflow. We hold ISO 9001:2015 certification and can supply third-party test reports on request.
The questions buyers ask us most often, answered directly.
Our MOQ is 1 tonne for liquid PCE mother liquor and 500 kg for PCE powder. For trial orders we can arrange 25 kg packs so you can run your own laboratory tests before committing to a bulk purchase. Macromonomer trials start at 25 kg.
Yes. We provide free samples of 1 kg (liquid) or 500 g (powder) for qualified buyers. You cover only the international courier cost, which is fully deducted from your first commercial order. Samples ship within 3–5 working days.
Samples ship in 3–5 working days. Full container orders ship 7–15 working days after receipt of deposit, depending on product and quantity. We will give you the realistic date rather than the date you would prefer to hear.
For trial orders: 100% T/T in advance. For regular orders: 30% T/T deposit with 70% balance against B/L copy, or an irrevocable L/C at sight. Longer credit terms become available once we have a trading history together.
Yes, both. OEM means we supply under your own brand with your labels and packaging. ODM means our R&D team develops a formulation matched to your local cement, aggregate and climate. Tell us your target specification and annual volume.
Yes, and it is included at no extra cost. Support is available by email, WhatsApp or video call. For customers taking bulk volumes we can send a technical engineer to your plant to assist with trial production and dosage optimization.
Send us your mix design and a sample of your local cement. Our technical team will recommend the right grade and dosage — or develop a custom formulation for you. No obligation, no cost for the consultation.